XAG P Series, Pilot Operating Handbook, Page: 61 / 73

@2018 XAG Australia All Rights Reserved Page | 61
Operation Flight Parameters - Application
This interface provides basic information about the
current Operation settings for the Task. Click on this section to
adjust the settings.
Speed
Speed of the Aircraft during Application
Height
Height of the Aircraft during Application
Terrain
Enable:
If Terrain Setting is enabled, the aircraft will follow the terrain
on the preset height during Operation.
Disable:
If Terrain Setting is disabled, the aircraft will follow the preset
height based on the RTK Station.
Sensibility
Low
Response to change in terrain elevation slowly, recommended
for terrain with rapid change in elevation in order to maintain
a stable altitude.
Medium
Response to change in terrain elevation moderately,
recommended for terrain with moderate change in elevation
in order to maintain a stable altitude.
High
Response to rapid change in terrain elevation, recommended
for terrain with gradual change in elevation in order to
maintain precise altitude.
Obstacle Avoidance
Enable:
If enabled, the aircraft will avoid any obstacles that had been
previously marked by Mapping APP and obstacles that were
detected by the APAS Obstacles Avoidance.
Disable:
If disabled, the aircraft will ONLY avoid any obstacles that had
been previously marked by Mapping.