XAG AUSTRALIA
18
Motion Control
Hover / Switch Mode
Hover:
Press the Hover Button to command the
UAV to Hover
Switch Mode:
Press and Hold the Hover Button
to switch Mode. The ACS2 Remote
Controller will exit Manual Control and
enter Autonomous Mode, the Controller
will also broadcast Autonomous Mode
Speed Control
Broadcast:
Press the Speed Broadcast Button once
to broadcast the current Speed
Increase Rate:
Press the Speed + Button to increase the
Flight Speed by 0.5m/s
Decrease Rate:
Press the Speed - Button to decrease
the Flight Speed by 0.5m/s
The Maximum Flight speed of the UAV with Obstacle detection is
0.5m – 6.0m/s
🧷
IMPORTANT
Move the UAV Forward
Move the UAV Backward
Move the UAV Sideway to the Left
Move the UAV Sideway to the Right
Rotate the UAV Counter-Clockwise (CCW)
Rotate the UAV Clockwise (CW)
Summary of Contents for ACS2
Page 1: ...ACS2 Control Stick User Manual EN Version AU V1 0 ...
Page 2: ......
