3.
Do not heat above 60
o
C
9.
I
NSERT
SAM
CARD
After removing the battery cover, the user can find SAM *2 (left) slots at the upper side of
battery (
Figure 9
). Please insert the card correctly as the icon shown on the
cover:
Figure 9
10.
L
OADING
T
HE
P
APER
Gently pop the printer cover’s latch; then pull the cover (
Figure 10
). Load a roll of thermal
paper into the printer. Load it so that the print-side of the paper will feed out facing the
operator. Close the cover by pressing on the center of the printer cover. Use the serrated bar
to tear off any excess paper.
Figure 10
