24
Setup
»
Switch on the device by pressing and holding the
- button
for approx. 3 seconds. A beep will sound as confirmation.
»
Both walkie talkies have a belt clip that can be removed if
desired.
»
Pull the tab of the belt clip in the opposite direction and then
pull the clip upwards out of the holder.
»
To reinsert the belt clip, simply guide it back into the holder.
The belt clip audibly clicks into place.
Multiple Walkie Talkies from the above model numbers can be
used and function with each other.
OPERATION AND BUTTONS EXPLANATION
Switch on the device as described under „ Setup“. The display
shows the following settings:
»
Selected channel and subchannel
»
Transmitting power
»
Battery capacity
»
Volume of the speaker
Each button press causes the display to light up briefly.
Key lock
Press and hold the
button until you hear a beep and a key
symbol appears in the display.
To unlock the buttons, press and hold the
button again
until you hear a beep. The key symbol disappears.