X2E XORAYA ML-N4000, User Manual

Page: 104 / 190

U
SER
M
ANUAL
X
ORAYA
S
UITE
104
5.5.3 Signal configuration
In this section, you configure signals and define signal processings and
triggers.
Messages and signals
The payload of a message consists of signals with
variable bit length.
Messages and signals are assigned names for easier
handling.
Settings:
1 Add signal manually 4 Refresh signals
2 Edit signal 5 Configured signals
3 Delete signal 6 Signal selection
Select the desired signals from (6) to add them to the list of configured
signals (5) . (
➔
Signal selection)
This list is stored temporarily or permanently on the ML-N4000.
Click (1) or right-click anywhere in the list (5) to add additional signals
manually.
Click (2) or right-click a configured signal in the list (5) to edit this signal.