X-IO ISE-2 Series, User Manual

Page: 40 / 178

Page 32 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide Management Tools
Logging In
This section describes the steps to log into the Web management tools. The user ID is a
dministrator
(case
dependent) and the default password for the first-time login, set by manufacturing, is
administrator
. The
password reverts to this default upon a reset to factory settings, during an ISE reformat (see “Reformat an ISE”
on page 142).
Web-Mgt
To log into the Web-Mgt (Classic) tool:
1. Obtain the IP address or host name of the MRCs from the site network administrator.
2. To log in to the target ISE, type the IP address or host name of one of the MRCs in the ISE into the
browser’s Address field as shown in the following examples:
http:// <static_ip_address>
or
http:// <dhcp_generated_address>
or
http:// <mrc_host_name>
3. Press
E
NTER
.
The System Login view appears.
4. Click
Login
.
The System Authentication dialog appears.
Figure 27. Classic Login Authentication
5. Enter the login credentials as follows:
User name
:
administrator
Password
:
<password>
The default password for the first-time login is
administrator .
6. Click
OK
.
The Web-Mgt is now running and Orchestrator is accessible to manage the site ISE systems.
Orchestrator
To log into the Orchestrator ISE management tool:
1. Enter the name or IP address for an ISE-2 (Model 2400) system
2. On the Orchestrator Login screen (Figure 28 on page 33) enter the User Name as
administrator
.
3. Enter the Password as
administrator
.