X-IO ISE-2 Series, User Manual

Page: 112 / 178

Page 104 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide Monitoring
Orchestrator System Summary
Connect to Orchestrator to view a status summary for any ISE system within the site network. To display the
system summary,
Expand All Devices
and
Click on an ISE
in the left navigation pane on any Orchestrator. The
summary appears (shown below). This system summary is also accessible through the Groups link in the left
navigation pane. Refer to the
Orchestrator User Guide
for use details.
Figure 75. Orchestrator System Summary
The Orchestrator System Summary display includes the items listed in the following table.
Table 27: Status Summary Description
Status Summary Items Description
ISE Identification
ISE DNS name and IP addresses assigned to the Ethernet ports on the MRCs,
where address one is that of MRC one and address two is that of MRC two.
Up Time
Time since the last start or re-start of the ISE
Identifier
WWID of the ISE
Serial Number
Unique number identifying this ISE, stored in the System Status Module
Model
Model number for this ISE
Temperature Gauge
Ambient temperature of the ISE
ISE: Operational (None)
ISE
status
(
details
): 1) Operational (None), 2) Warning (Component Degraded),
3) Warning (None)
MRC 1, MRC 2
Hot link to
Physical View
>>
MRC
tab
DATAPAC 1, DATAPAC 2
Hot link to
Physical View
>>
DataPac
tab
POWER SUPPLY 1, POWER SUPPLY 2
Hot link to
Physical View
>>
Power Supply
tab
BATTERY 1, BATTERY 2 Physical View
>>
Battery
tab
STORAGE POOL 1, STORAGE POOL 2 Physical View
>>
Storage Pool
tab
VOLUMES
Hot link to
Physical View
>>
Volumes
tab
Switch to Classic Web UI
Switch to using the classic Web-Mgt interface button