14
X GLOO
®
•
Windeckstr. 4
•
83250 Marquartstein
•
Germany
7. TAKEDOWN
7.1 RELEASE AIR
• First remove all optional elements (e.g. walls,
canopies, tunnel parts) that are attached to the tent.
• Open the valves on each tube (see section 3).
PLEASE NOTE:
It is recommended to let the tent rest on
the ground with the tubes stacked on top of each other
after opening the valves. This way the air can escape
almost completely without any effort.
7.2 FOLD
• Turn the tent inside-out so that the seam of the tube
intersection loop is facing outwards.
• Lay the tubes on top of one another with the valves
facing upwards. The roof should be drawn outwards
in large folds.
• Wait a few minutes for the last of the air to escape,
and then roll up the tent starting from the tube
intersection and moving down to the tubes.
7.3 PACK
• The tent can now be placed in the supplied transport
bag. The walls can be packed safely in the
optionally-available side wall bag.
