8.
Continue the appropriate START checklist from this point until it is complete.
9.
Remove all ground equipment, both using the MENU options as well as any third party ground
equipment you have deployed.
10.
Make your PUSHBACK selection and follow the ground crew’s instructions.
11.
After the pushback tug has parked and you have ground control clearance, proceed to the
runway and have fun… but don’t forget the rest of the checklists. These will follow you all
through the flight. They are there to keep you out of trouble, to ensure the aircraft operates as
you would expect, and most importantly to keep your virtual self and your virtual crew and your
virtual passengers… alive.
6.1.1 POWER ON
When the batteries are on, there are only 2 displays on, including the backup attitude indicator.
Displays (going from left to right) 2&3 are powered. Display 2 is a status page, display 3 is an EICAS
page. The MCDU on the captain’s side is powered as well. The rest of the displays will turn on after
an AC power is provided from the APU, GPU or engines.
55
Summary of Contents for Embraer EJets Series
Page 1: ......
Page 2: ...2...
Page 18: ...Pull down click on the fire extinguisher handle should an engine catch fire 18...
Page 23: ...3 5 PEDESTAL 3 5 1 OVERVIEW 23...
