4
X-Cite
®
exacte
User Guide
035-00283 rev 3
3.2 Safety Precautions
The X-Cite
®
exacte
is equipped with two safety sensors to protect the user from
accidental UV exposure. In addition, please observe the following precautions during
use. This series of cautions, warnings and dangers relate to the operation and
maintenance of the X-Cite
®
exacte
. They are also presented throughout this User’s
Guide where necessary.
Warning
Eye damage may result from directly viewing the light produced by the lamp used
in this product. Always use protective eyewear and turn the lamp off before
removing cover.
Caution
Never look into the light emitting end of the light guide. The light could severely
damage the cornea and retina of the eye if the light is observed directly. Eye
shielding must be used at all times as well as clothing to protect exposed skin.
Warning
Always make sure the light guide is properly inserted into the X-Cite
®
exacte
and
the microscope prior to turning on power to the unit. This will minimize the risk of
exposure to the UV light.
Caution!
To prevent damage/ degradation of the light guide, always allow adequate
clearance at the front of the X-Cite
®
exacte
unit to prevent kinking or excessive
bending.
Warning
To reduce the risk of fire or shock, always replace the fuses with the same type
and rating.
Warning
Disconnecting of main supply source is only possible by unplugging the power
cord.
Danger
This unit contains HIGH VOLTAGE components. It is recommended that ONLY
QUALIFIED TECHNICAL PERSONNEL perform any testing or repairs described in
this manual. Disconnect the AC power cord from the unit before opening the cover
of this unit. All cover screws must be replaced prior to applying power to the unit, or
safety of the unit will be impaired.
Summary of Contents for Exacte
Page 1: ...X Cite exacte User Guide...
