Quick-Start Guide
Wyse
®
X Class Mobile Thin Client, Model Xn0m
Products: X00m, X50m, X90m7, X90m7p, X90mw
See accompanying documents in the shipping carton for License Agreement and Warranty information. To find the latest Quick-Start
Guide, go to
and click on the name of your cloud client.
Important:
A printed copy of the Wyse Technology End User License Agreement is included in the shipping box and provided for your
reference only. The license at
as of the purchase date is the controlling licensing agreement. By copying,
using, or installing the software or the product, you agree to be bound by those terms.
Important:
http://support.wyse.com/selfservice.html
Caution:
Improper connection, mounting, or use of this product could result in component failure and/or flash memory corruption. Read
Safety Guidelines
before setting up and operating the cloud client.
Be sure you have read the
Safety Guidelines
inside this document
before setting up and operating your mobile thin client.
1. Install the Battery
With your mobile thin client turned off, insert battery in the
battery compartment located on the underside of the mobile
thin client and secure it by sliding the latches.
Note:
Fully charge/discharge your new battery up to four
cycles before achieving full capacity of the battery.
To Remove Battery
- With your mobile thin client turned off
and disconnected from the power adapter, slide the battery
lock to unlock, and then slide and hold the battery release
latch to gently pull the battery out of the battery compartment.
2. Connect the Power Cable
Plug the power adapter connector to the mobile thin client as
shown. Plug the AC power cable to the power adapter, and
then plug the other end of the power cable to a wall outlet.
Note:
You can connect the power adapter at any time with the
computer turned either on or off.
Setting Up Your Mobile Thin Client
3. Turn On the Mobile Thin Client
Raise and adjust the lid, and press the power on/off button for
two seconds. When you release the power on/off button, the
power icon on the system indicators lights up.
To Turn Off the Mobile Thin Client
- Press the power on/off
button, or go to
Start > Shut Down
and select
Shut down
.
(Case Sensitive)
* For administrators, log off User desktop while holding down the
Shift
key until the logon box
appears.
Windows- and Linux-Based Cloud Client
- After turning on, the cloud client initially goes
through several boot sequence procedures before the operating system loads. Information
about setting up your server environment is available in the cloud client’s documentation.
Cloud PC
- WSM software is required; no operating system is installed, and therefore no
default user name and password are defined. Information about setting up your server
environment is available in the WSM documentation.
Your mobile thin client makes connections through:
•
Wired Network (LAN)
•
Wi-Fi
Information about connecting your mobile thin client to the
Internet is available in the product’s administrator guide (X00m,
see WSM users guide).
Default User Names and Passwords
Wyse
®
Enhanced
SUSE Linux Enterprise
Microsoft
®
Windows
®
Embedded
Standard 2009
*
/ 7
*
/ 7p
*
Administrator
User Name
admin
administrator
Password
admin
Wyse#123
User
User Name
thinuser
user
Password
thinuser
Wyse#123
Making Connections
