Wyse Winterm 3200LE, Administrator'S Manual

Page: 241 / 352

209
Table 31-1 Upgrade Properties Sheet
Function Description
Local Firmware
Upgrade Use this group box to upgrade your terminal’s firmware
using an FTP server. The functions are:
Use FTP Information from DHCP Server
Select this function if you want to get the FTP server
and directory information from a DHCP server. Click on
this radio button to select the function. By default the
function is disabled.
Use Local FTP Information
Select this function if you want to enter the FTP server
you will use for the upgrade. Click on the radio button
to select the function. By default the function is
enabled.
Server Name
Enter the name or IP address of the FTP server where
the binary and params.ini reside. The default is blank.
Server Directory
Enter the directory on the FTP server where the binary
and params.ini reside. The default is blank.
User ID
Enter your user account in this field. The default is
Anonymous.
Password
Enter your password in this field. The default is *****.
Status
This display box shows status information about the
connection to the FTP server, and the firmware
download. Connect and download errors are also
reported. The default is blank.
Save Password
Check this box to save the entered password in the
registry.
Upgrade Click on this command button to initiate the upgrade
procedure. By default the button is disabled until an
entry is made in the FTP Server field.