Wyse 3315SE, Reference Manual, Page: 98 / 260

74
Terminal Management
Using the Display Properties Sheet
To invoke this properties sheet:
1. Press F2 to invoke the Terminal Properties dialog box.
2. Click on the Display tab.
The following table discusses the functions of this properties sheet.
Table 13-1 Display Properties Sheet
Function Description
Desktop Area and
Refresh Frequency The scrolling list box displays the current terminal
display resolution. Scroll and click on a selection to
change resolution. The default is
600 x 480 @ 60 Hz.
Enable Energy
Savers Click on this check box to enable the energy saver
functions. When you check this box, the three functions
in the group box are activated:
Screen Saver
Click on this radio button to enable the screen saver.
By default this function is not activated.
Turn Off Monitor
Click on this radio button to use this function as an
energy saver. The function works by shutting off the
terminal's display rather than displaying a screen
saver. By default this function is not activated. When it
is activated, this function is enabled.
Wait
Adjust the amount of time (in minutes) that elapses
before the energy saver function you have selected
starts. You can enter your own number or use the
scrolling list. By default the function is not activated.
When it is activated, the default is
12 .