Wyse 3315SE, Reference Manual

Page: 212 / 260

188
Client Security
Using the Add User Account Dialog Box
Use the Add User Account dialog box to set up the parameters for new terminal
accounts. To invoke this dialog box:
1. Press F2 while in the Winterm Connection Manager .
2. Click on the Security tab in the Terminal Properties dialog box.
3. Click on the Add User... command button.
The following table describes the functions of the Add User Account dialog box.
Table 38-1 Add User Account Dialog Box
Function Description
Enable Password Change Group box used to set up password functions.
Note
The fields of this group box are limited to 20 characters
or less.
Enable Password Change
Click to enable. Enabling the function will allow the user to
change a password. This function is activated by assigning the
account
User account privilege. By default Enable Password
Change is deactivated.
Username
Type in the new user name. By default the field is blank.
Password
Type in the password. By default the field is blank.
Confirm Password
Type in the password again. By default the field is blank.