Wyse 3315SE, Reference Manual, Page: 128 / 260

104
Connection Configuration
•
Citrix ICA Client
ICA (Independent Computing Architecture) protocol, which connects to an ICA
(Winframe/Metaframe) server. See “ICA Connections” for further instructions
about how to create this kind of connection.
•
Dial-Up Client
Connects using a modem and PPP (Point-to-Point Protocol). See “Dial-Up
Connections” for further instructions about how to create this kind of connection.
•
Microsoft Remote Desktop Client
RDP (Remote Desktop Protocol), which connects to a WTS (Windows Terminal
Server) server. See “RDP Connections” for further instructions about how to
create this kind of connection.
•
Terminal Emulation
Connects to multiple terminal emulation applications. See “Terminal Emulation
Connections” for further instructions about how to create this kind of connection.
Once you have made your selection, click on
OK
to proceed with creating a
connection.
Using the Startup Function
Your terminal can be set to automatically connect to a server when you turn your
terminal on. This function is set using the
Connection Startup
dialog box. The
following figure shows this dialog box.
Figure 21-2 Connection Startup Dialog Box
To invoke the Connection Startup dialog box:
1. Click on the Configure tab in the Winterm Connection Manager dialog box.
2. Click on the Startup command button on the Configure properties sheet.