Copyright © 2021 WyreStorm Technologies |
WyreStorm.com
SW-540-TX-W User Manual | 210908
6 of 12
Technical Support: 844.280.WYRE (9973)
Input Switching & Modes
The SW-540-TX-W features three unique switching modes.
Standard: This is the default mode of the switcher. It supports full screen and multiview processing. Multiview
layouts are automatically built by the switch when it detects a second, third or fourth input. When the switch is in
multiview mode you will be able to select or de-select multiple inputs for the Primary output (output 1). The Primary
and Secondary outputs are mirrored in this mode.
Full Screen: Multiview processing is not supported in this mode. Both the Primary and Secondary outputs will mirror
the same content.
Matrix: In this mode, the Secondary output (output 2) can be matrix switched independently from output 1.
However, when in matrix mode output 2 does not support multiview processing. Only a single full screen input can
be selected and displayed on output 2. The Primary output can still process multiview.
