Copyright © 2021 WyreStorm Technologies |
WyreStorm.com
SW-540-TX-W User Manual | 210908
12 of 12
Technical Support: 844.280.WYRE (9973)
The switcher is also capable of automatically sending a power off command after X minutes when there is no input
sync detected. In the Control Strategy drop down enter in a value between 0-60 to set how long the switcher will
wait before sending the power off command. Enter in a value of 0 to disable auto standby.
You can also choose what type of command is sent (CEC, RS232 or Both) during auto-sync detection.
Splash Screen
When no video signal is being transmitted, the SW-540-TX-W will display a splash screen. This screen shows quick
connection steps, so users understand how to cast to the display. This image can be replaced with any image you
require. This is useful for inserting company logos or custom background images based on the installation
environment.
