Wyrestorm NHD-SW-0501 Manual Download Page 16

Page: 16 / 18

WyreStorm.com

Presentation Switcher API | 180618-1621

16 of 18

North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 343

Email:

[email protected]

Contacting Support

Phone: North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 343
Email:

[email protected]

On Line Chat (Accessible through website):

http://WyreStorm.com/Contact-Tech-Support

Revision History

Section

Update

v3.2.0- 180618 | June 2018 (Support for v3.2.0 or Higher)

Source Selection
Command

Source Selection - Added NULL as a value for selection to allow for selecting a blank screen.
Query Current Source - Added NULL and ScreenLink as returned values and active/inactive status of the
connection. Requires v3,2.0 or higher.

Audio Commands

Added Increase and Decrease volume commands.
Added Link Audio In to Video and Query Audio In link to Video.
Requires v3,2.0 or higher.

v1.1

–

180327

–

March 2018

Various

Added NHD-SW-0501 as supported product.

2.5 Audio Commands

Added Set Audio Output Volume Level (Incremental) Command

1.5 Source Switching
Commands

Added ScreenLink Start Page

v1.0 - 151021-1044 - October 2016

All

Original Release

Summary of Contents for NHD-SW-0501



















Search results

Summary of Contents for NHD-SW-0501

Reviews:

Related manuals for NHD-SW-0501

Brands by name

Popular brands

Wyrestorm NHD-SW-0501, Manual

Search results

Summary of Contents for NHD-SW-0501

Reviews:

Related manuals for NHD-SW-0501

Brands by name

Popular brands