© Copyright 2018 WyreStorm Technologies |
WyreStorm.com
Presentation Switcher API | 180618-1621
13 of 18
North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 343
Email:
7.
Control Commands
Power On (Wake Up) CEC Enabled Device
Syntax:
e e_cec_one_touch_play
Description:
Wakes up a CEC-enabled device such as a display device connected through
HDMI or HDBT port.
Accepted Values:
Example Command:
e e_cec_one_touch_play
Response:
none
Power Off (Sleep) CEC Enabled Device
Syntax:
e e_cec_system_standby
Description:
Makes a CEC-enabled device such as a display device connected through
HDMI or HDBT port enter standby mode.
Accepted Values:
Example Command:
e e_cec_system_standby
Response:
none
Enable/Disable Auto Switching
Syntax:
gbconfig --plug-detect=[Value]
Description:
Enables or disables auto switching.
Accepted Values:
Y: Auto switching enabled | N: Auto switching disabled
Example Command:
gbconfig --plug-detect=y
Response:
none
Query Auto Switching State (Enabled/Disabled)
Syntax:
gbconfig --show --plug-detect
Description:
Queries that auto switch is enabled or disabled.
Accepted Values:
Example Command:
gbconfig --show --plug-detect
Response:
Y: Auto switching enabled
N: Auto switching disabled
Switcher Reboot
Syntax:
reboot
Description:
Reboots the switcher.
Accepted Values:
n/a
