HALO VX10
HALO Series All In One Video Bar
Quickstart Guide
Copyright © 2022 WyreStorm Technologies |
HALO VX10 Quickstart Guide | 220113
INT: +44 (0) 1793 230 343 | US: 844.280.WYRE (9973)
1 of 2
Setting up the Video Bar
FOR PLACEMENT ON A MONITOR
1.
Angle the mount of the HALO VX10 to fit on a
TV, computer,or monitor at a position or angle
you desire.
2.
Adjust the HALO VX10 to make sure the foot on
the mount is flush with the back of your device.
3.
Manually adjust the HALO VX10 up/down to the
best position to frame yourself.
FOR PLACEMENT ON A TRIPOD*
1.
Locate the M12 tripod thread on the bottom of
the Halo VX10.
2.
Secure the Halo VX10 on your tripod by twisting
it into the M12 thread.
3.
Place your Halo VX10 with the tripod anywhere
you desire to the best position to frame
yourself.
1.
Drill holes on the wall and insert the expansion
screws provided.
2.
Secure the wall-mounted bracket on the wall
using the screws provided.
3.
Secure the HALO VX10 on the wall-mounted
bracket.
*Tripod not included
Wall Mounting Installation
CONNECTING THE VIDEO BAR
Plug the HALO VX10 into an available USB port on your computer.
*For best performance, use a USB 3.0 port.
Connect the DC power supply to a mains outlet.
USB-C to USB-A*
