Setup and Operation
Connect an HDMI 4K or HD source to the input port of the EXP-
SP-0104-4K
Connect HDMI 4K or HD display device (LED/LCD screen,
projector) to output ports.
Care should always be taken when inserting/extracting HDMI
cables – do not force connections should resistance be felt.
Both 4K and 1080p HD sources and displays can be connected
within the same distribution without causing resolution conflict
by using the WyreStorm EXP-SCL-DAC-4K scaler with Dolby
downmixer between the EXP-SP-0104-4K splitter and connected
displays.
Transmission from a 4K source is scaled down to 1080p HD 24fps,
while a 1080p source signal is upscaled to 4K at 30Hz.
Visit
wyrestorm.com
for more information on 4K/HD scaling and
Dolby downmixing.
Insert the 5V power adaptor into EXP-SP-0104-4K Power port and
connect to wall outlet mains supply.
After ensuring all sources and displays are properly connected, turn
on mains power supply.
Check Power and HDMI Input/Output LED indicators on the
front panel are fully lit for correct connection. If not, check cable
connections or follow the troubleshooting overleaf.
Multiple splitters can be cascaded to expand distribution - see full
manual for details
1
1
2
2
2
2
2
!
3
3
3
4
4
5
6
6
NOTE: Maximum HDMI transmission distance
Input - 10m/33ft (4K & 1080p)
Output - 10m/33ft (4K), 15m/49ft (1080p)
HDMI Cable
Performance Guide
EXP-SP-0104-4K
0ft
328ft
32ft
65ft
98ft 131ft 164ft 197ft 230ft 262ft 295ft
0m
100m
10m
20m 30m
40m 50m
60m 70m
80m 90m
4K
Transmission
HD
Transmission
Mains
Power
EXP-SCL-DAC-4K
4K/HD scaler
Quickstart Guide
WyreStorm Express™ 1 x 4 HDMI 4K Splitter
EXP-SP-0104-4K
SOURCE DEVICE
DISPLAY OUTPUT
DISPLAY OUTPUT
DISPLAY OUTPUT
DISPLAY OUTPUT
EXP-SCL-DAC-4K
4K/HD scaler
