Wyrestorm EXP-EX-35-G2 Quick Start Manual Download Page 1

Page: 1 / 4

18Gbps HDMI-over-UTP Extender

with IR and PoC

EXP-EX-35-G2

Quickstart Guide

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

1 of 4

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the

installation process.

Basic Wiring Diagram

IMPORTANT! Installation Requirements

• Visit the product page to download the latest firmware, document version,

additional documentation, and configuration tools.

• Read through the

section for important wiring

guidelines before creating or choosing premade cables.

In the Box

1x EXP-EX-35-G2 Transmitter
1x EXP-EX-35-G2 Receiver
1x IR Emitter
1x IR Receiver
1x 12V DC 1A Power Supply (US/UK/EU/AU)
4x Mounting Brackets

Cat5e/6/6a/7

HDMI

12V DC

Power Supply

EXP-EX-35-G2 Transmitter (TX)

EXP-EX-35-G2 Receiver (RX)

4K/UHD HDMI Source

KEY

HDMI
Cat6/7
IR
Power

HDMI

4K/UHD HDMI Display

Summary of Contents for EXP-EX-35-G2

Page 1: ...Diagram IMPORTANT Installation Requirements Visit the product page to download the latest firmware document version additional documentation and configuration tools Read through the Wiring and Connec...

Page 2: ...the supplied IR emitter to control a local device from the remote display location via HDBaseT IR IN 3 5mm 1 8in Stereo Jack Connect to the supplied IR receiver to send IR to the remote display locat...

Page 3: ...party emitters and receivers can be used however these devices must operate in the same manner as the WyreStorm devices Due to differences in IR across 3rd party control systems their IR ports should...

Page 4: ...ted Standards DCI RGB HLG HDR 10 Dolby Vision not supported Maximum Pixel Clock HDMI 600MHz UTP 297MHz Communication and Control HDMI HDMI HDCP 2 2 EDID DVI D supported with adapter not included UTP H...