IMPORTANT! Installation Requirements
This extender requires connection via RS-232 or Ethernet in order to configure
functions such as EDID. Ensure that the following items are on hand before
proceeding with the installation.
• PC or Mac
• Telnet and Terminal software such as
• USB COM Port Adapter (Not Included)
• WyreStorm Part: CAB-USB-3PIN
• Network router and/or switch if using IP telnet for configuration.
• Latest version of the
for advanced configuration not
covered in this document.
In the Box
1x EX-SW-0301-H2 Transmitter
1x EX-SW-0301-H2 Receiver
1x AC 100-240V 50/60Hz to DC 12V Power Adapter
5x 3-pin Phoenix Connectors
4x Mounting Brackets (1set for Transmitter/1set for Receiver)
1x Quickstart Guide (This Document)
Copyright © 2018 WyreStorm Technologies |
EX-SW-0301-H2 v1 Quickstart Guide | 180619
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features before beginning the
installation process.
Basic Wiring Diagram
KEY
HDMI/DisplayPort
HDBaseT
RS-232/Serial
Analog Audio
Analog Video
Control System
Projector
Personal Computer
Laptop
Media Player
Digital Signage
Player
Amplifier
Projector Screen
RX to TX
3:1 HDMI/VGA/DP Switching Extender with Scaling Receiver,
Relay Triggering and HDCP 2.2
EX-SW-0301-H2
Quickstart Guide
