8
Maintenance / Care
Attention!
Clean the device only when the mains plug has been removed.
■
Clean the lamp with hot water, or if necessary with a standard detergent. Do not use any technical
solvents, acetone, benzene, tetrachloromethane, etc.
■
Likewise, do not leave in contact with oils or grease for long periods.
■
A damaged connecting cable must be replaced by the manufacturer or another such specialist com-
pany
Spare parts
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged. With any enqui-
ries or spare parts orders, always quote the article
number as given on the device type plate.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by warranty.
Claims can only be acknowledged, if the device
is transferred fully non-disassembled to a Würth
agency, your Würthsales representative or a Würth
authorized customer service office. Subject to techni
-
cal changes without prior notice.
We accept no liability for printing errors.
Environmental Instructions
Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
