AHC-XP
Dew-point driven power controller for glass and handrail heaters in
combination with DCC-XP
AHC-XP_V2.20_PI_2019-04_EN
Subject to technical modifications
Page 1 of 4
Front view
Features
Cost-optimised operation
Used in combination with DCC-XP from version 5
Room temperature sensor and humidity sensor can be connected to the device or over a
CAN bus (TRH-XP, TRS)
Emergency power mode to avoid peak loads by digital input
Display of store temperature, relative humidity, dew point and operating time
4 phase-shifted outputs each for 2 ECA970 electronic load relays
Even distribution of current loads
8 different control characteristics per channel for all standard refrigeration units
Adjustable minimum operating time per channel
Good temperature stability with 72 switchings per hour
Operating time storage for statistical evaluation
Graphical representation of power consumption in FRIGODATA XP
Simple parameter settings
Foreign-language front plates available on request
Direct connection of a CAN-USB to the service socket
Connection to the Wurm system by communication bus (CAN bus) and FRIGODATA XP
