background image

Nicotine, dust, fingerprints

OMT CD  –  Edition: 13.08.2007

36

11

Player and CD cleaning

Dust, fingerprints or other dirt on the disc surface can cause skipping,  jumping or sticking

problems. Because of this 

never touch the surface of a disc!

 However it is rather easy to remove

nicotine, dust or fingerprints.

11.1

Nicotine, dust, fingerprints

Dust can be removed with a lintfree soft cloth. If necessary,

remove heavy dirt or fingerprints with a moistened soft cloth

soaked in a solution of water and a detergent. Never use

record cleaning sprays or anti static sprays! Furthermore, do

not use other types of cleaners containing benzene, thinner or

other solvents. These liquids will cause damage to the surface

of discs. Move the cloth from the inside towards the outside

and not in circular motion.

11.2

Removing scratches

Use a soft cloth and a soft polish.

11.3

Laser lens cleaning

Smoke and dust soil the lens. It can be cleaned with a

cue-tip soaked in a detergent (i.e. Kodak lens cleaner,

available under part no. 0051735 or 25% Isopropanol

IPA). Place the tip on the lens and press down carefully. 

Caution! The whole laser unit is very sensitive!

1.

Move the cue-tip only in the direction shown in

the picture so that the lens cannot move.

2.

Do not scratch the special treated surface of the

lens.

3.

The cleaning solution must not run into the focus unit.

4.

Keep away metal parts from the lens unit. A strong magnet is located underneath the lens. It

attracts also small metal parts and this can block the complete unit.

Summary of Contents for OMT F91













































Reviews: