manualshive.com logo in svg

Wurlitzer International L, Operating Instructions Manual

Share
Download
Wurlitzer International L Operating Instructions Manual Download Page 57

The LCD display

International L  – edition: 17.02.2006

57

15.9

Programming example

In stand-by mode (message 00) the text "

IN OPERATION

"  should be displayed.

1.

Keep pressing key P of the programming terminal while
touching key S once. The upper line of the display (edi-
tor) may show the following.

This indicates that the actual message 00 comprises
one line with 15 characters.

2.

Erase the characters by keeping button 0 pressed until
the display is

The text to be entered comprises 11 characters and 1
blank one. As earlier described, one line can have a
maximum of 16 characters. To have the text in the middle of the display, enter two blank char-
acters at the beginning of the line.

3.

Keep pressing button 9 until you have the exclamation
mark 

!

 in the cursor field.

4.

Press button 1 once, which makes the character in the
cursor field vanish. Now enter the two blank characters
by pressing key C twice. The display is now

5.

Press button 9 twice, which brings the capital A into the
cursor field. Keep pressing button 2 until character 

I

 is

displayed in the cursor field. Now press key C to pro-
gram the character 

I.

6.

Keep pressing button 2 until capital 

N

 is displayed in the

cursor field. Touch key C once to programme the said
character.

7.

Keep pressing button 9 until the exclamation mark (!) is
in the cursor field. Press button 1 once, which brings the
blank character into the cursor field. Press button C to
programme the blank character. The capital 

N

 has now

moved one position left in the computer memory.

8.

Press button 9 twice, which brings the capital A into the
cursor field. Keep pressing button 2 until the capital 

O

 is

on display in the cursor. To programme the said charac-
ter, press button C. The display is

9.

Push button 2 once to have the capital P in the cursor
field. To enter the character into memory, press key C.
The display is

We have, so far, produced the characters IN OP. Pro-
ceed in the manner described above to produce the rest of the characters. Use button 2 to go
forwards and button 1 to go backwards in the alphabetic order. Always complete the job by
pressing key C.

After the last data input the display should show

The 2 space characters on the right text side don't have
to be programmed. Press key S once to exit the service
programme, message "IN OPERATION" is displayed.

00:01-15= >  <

00:01-00= >  <

00:01-00= > !<

00:01-02= >  <

00:01-03=I> I<

00:01-04=IN> N<

00:01-05=N>  <

00:01-06=O> O<

00:01-07=OP> P<

00:01-14=ON> N<

Summary of Contents for International L

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands