wtw pHotoFlex, Operating Manual

Page: 76 / 111

Operation pHotoFlex / pHotoFlex Turb
76 ba75491e05 04/2009
4.9.4 Transmitting data
The following table shows which data are transmitted to the interface in
which way:
Note
With the <PRT> key you output the data that is being shown on the dis-
play to the interface (displayed measured values, stored measurement
datsets, calibration record).
12 Unit of 11
z
°C / °F
z
nm
13 Measured value
status of 11 VALID, INVALID, UFL, OFL
Data Operation / description
Current
measured value
z
Press <PRT>.
z
Simultaneously with every manual storage
process.
Stored measured
values
z
Display stored dataset and press <PRT>.
z
All datasets according to the filter criteria via
the RS232 download function
(see section 4.8.2).
Calibration record
(pH electrode)
z
Calibration record of a pH electrode with
<PRT> (after calling up from the storage or at
the end of a calibration).
z
Calibration record of a pH electrode at the
end of a calibration procedure is printed au-
tomatically.
Data Description