manualshive.com logo in svg

wtw pH/ION 7320, Operating Manual, Page: 14 / 104

Share
Download
wtw pH/ION 7320 Operating Manual Download Page 14

Printer (only pH/ION 7320 P)

pH/ION 7320

 14

ba75935e04

12/2017

4

Printer (only pH/ION 7320 P)

4.1

Commissioning / switching the printer on or off

Switching on the 

printer

Switching off the 

printer

1 Operating LED

– Is illuminated: Printer is switched on
– Flashes: Printer is switched off

2 Control panel with the keys 

<FEED>

 and 

<ON/OFF>

3 Lever to open the paper compartment
4 Lid of the paper compartment

2

1

3

4

1.

Connect the power pack to the pH/ION 7320 P.
The LED lights up green. The printer is ready for operation.
or
When the printer had been switched off (LED flashing):
Switch on the printer with 

<ON/OFF>

.

The LED lights up green. The printer is ready for operation.

If there is a USB-B connection at the same time (e.g. to a PC), the 
data are output to the PC only.

1.

Switch off the printer with 

<ON/OFF>

.

The LED flashes. The printer is switched off.

Summary of Contents for pH/ION 7320









































































































Reviews:

No comments