wtw PB 150 Operating Manual Download

Page: 44 / 108

Programming the automatic sampling

5.3.6

Finishing the program

After specifying the operating mode, some general settings follow.

Bottle filling

Here you specify the conditions for a bottle change.

Filling time per bottle

Specify the filling time per bottle in minutes (with time related bottle fill-
ing only).

time related bottle
change

The bottle is always changed after the speci-
fied number of minutes

sample related
bottle change

The bottle is always changed after the speci-
fied number of samplings

Press

The cursor appears in front of the selection.

Using

move the cursor to the required menu item and with

confirm.

– ACCORDING TO TIME: The TIME PER BOTTLE menu

opens.

– ACCORDING TO SAMPLE: The PROGRAM START menu

opens (continue with S

AMPLES

PER

BOTTLE

With

confirm the displayed interval.

A cursor appears on the displayed value.

Using

and

increase or decrease the value.

Using

confirm the displayed value.

The FIXED TIME FOR BOTTLE CHANGE menu opens.

Summary of Contents for PB 150













































































































Search results

Summary of Contents for PB 150

Reviews:

Related manuals for PB 150

Brands by name

Popular brands

wtw PB 150, Operating Manual

Search results

Summary of Contents for PB 150

Reviews:

Related manuals for PB 150

Brands by name

Popular brands