wtw Oxi 3315, Operating Manual

Page: 18 / 60

Operation Oxi 3315
18
ba75944e02 03/2012
4.4 Navigation
4.4.1 Operating modes
4.4.2 Measured value display
In the measured value display, you can
 open the menu for calibration and measurement settings with
<ENTER>
(short keystroke)
 open the system menu with the sensor-independent settings by pressing
<ENTER> Storage & config
for a
<ENTER_>
long keystroke, approx. 2 s).
 Change the display in the measurement window by pressing
<M>
(e.g. D.O.
concentration -> D.O. saturation index -> D.O. partial pressure ->).
4.4.3 Menus and dialogs
The menus for settings and dialogs in procedures contain further submenus.
The selection is made with the
<

><

>
keys. The current selection is dis-
played with a frame.
 Submenus
The name of the submenu is displayed at the upper edge of the frame. Sub-
menus are opened by confirming with
<ENTER>
. Example:
Operating
mode Description
Measuring
The measurement data of the connected sensor are shown
in the measured value display
Calibration
The course of a calibration with calibration information, func-
tions and settings is displayed
Storage in
memory
The meter stores measuring data automatically or manually
Transmit-
ting data
The meter transmits measuring data and calibration records
to a USB-B interface automatically or manually.
Setting
The system menu or a sensor menu with submenus, set-
tings and functions is displayed