Settings
Multi 9420
96
ba75964e04
04/2015
9.6.2
Data storage
This menu contains all functions to display, edit and erase stored measured
values.
9.6.3 Automatic
Stability control
The automatic
Stability control
(AutoRead) function continuously checks the
stability of the measurement signal. The stability has a considerable impact on
the reproducibility of measured values.
You can activate or switch off the automatic
Stability control
function (see
The measured parameter flashes on the display
as soon as the measured value is outside the stability range
when you switch over between the measured parameters with
<M>
.
when the automatic
Stability control
is switched off.
Detailed information on the memory functions of the Multi 9420 are
given in section 10 D
