Operation
Multi 350i
70
Terminating the auto-
matic data storage func-
tion prematurely
Proceed as follows to switch off the automatic data storage function be-
fore the adjusted storage duration has expired:
4.8.3
Editing the measured value storage
You can select the contents of the manual or automatic measured val-
ue storage by means of different filter criterions and
!
read them out on the display, and
!
output them to the interface.
Each measured value storage has a separate erasure function for the
entire contents, independent of the filter settings.
Editing the data storage
The storage can be edited in the system menu, submenu
Data storage
.
To open the system menu in the measured value display, press the
<MENU/ENTER>
key for approx. 1 s.
Note
The settings are explained here using the manual data storage as an
example. The same settings and functions are available for the auto-
matic data storage.
1
Press the
<STO>
key for a long time.
The following window appears.
2
Select and confirm
Yes
with
<
▲
> <
▼
>
and
<MENU/ENTER>
.
The measuring instrument switches to the measured value dis-
play.
The automatic data storage function is terminated.
Stop automatic storage?
Yes
No
Warning
Summary of Contents for Multi 350i
Page 10: ...Overview Multi 350i 8...
Page 82: ...Operation Multi 350i 80...
Page 106: ...Appendix Firmware Update Multi 350i 104...
Page 107: ......
