MIQ/Blue PS
What to do if ...
5 - 1
ba75573e04
05/2009
5
What to do if ...
5.1
Check of the radio connection
A yellow LED inside of both MIQ/Blue PS modules indicates the status
of the radio connection:
The status LED is located at the top edge of the rear radio board:
Fig. 5-1
Status LED for radio connection
5.2
Error causes and remedies
Already established
radio connection does
no longer work
LED state
Status of radio transmission
Permanently ON
Connection OK, no data transmission activity
Flickering
Connection OK, data transmission active
Permanently OFF
No connection
6
8
7
9
2
1
3
5
4
Status LED
Radio boards
Cause
Remedy
– Obstacle between the radio
modules
– Remove obstacle
– Range at the limit
– See point R
ANGE
INSUFFICIENT
– Moisture on antenna surface
– Wipe antenna dry
– Use sun shield
Summary of Contents for MIQ/Blue PS SET
