wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 75 / 216

System 2020 XT C
ONNECT
Operation
4 - 1
ba75970e01 10/2012
4 Operation
4.1 MIQ/MC2 controller
The MIQ/MC2 controller is the control unit of the IQ S
ENSOR
N
ET
.
4.2 Terminal
The terminal is the operating unit of the IQ S
ENSOR
N
ET
.
You can install the following terminal components:

Terminal MIQ/TC 2020 XT, configured as a terminal

PC Terminal C
ONNECT
, connected to the IQ S
ENSOR
N
ET
via the
Ethernet interface
The terminal can be used to:

Display measurement results

Starting calibration

Perform system and terminal settings

Display messages.
To guarantee data safety within the IQ S
ENSOR
N
ET
,
access to the following functions is only possible from one
terminal at the same time:

Opening the
Settings
menu

Starting calibration

Assigning IQ sensors or MIQ output modules as substi
-
tutes.
If one of these functions is already active at another termi
-
nal, a note appears on the display.
General key symbols are used for all operating steps in this
operating manual.
Details and deviations for usage of the PC Terminal C
ON
-
NECT
(see documentation of the
IQ IQ Software Pack C
ONNECT
).