wtw IQ SENSOR NET System 2020 XT, Operating Manual

Page: 48 / 216

Installation System 2020 XT C
ONNECT
3 - 20
ba75970e01 10/2012
Stacking the
MIQ modules
Fig. 3-12
Stacking the
MIQ modules (variant 2)
Fig. 3-13 Closing the housing (variant 2)
7 Attach the prepared MIQ module to the back of the front
MIQ module. At the same time, ensure that the two clips on the
front MIQ module click into place in the lid of the back
MIQ module. Subsequently, tighten the two screws (pos. 8 in
Fig. 3-11).
8 Check the position of the SN terminator switch and correct it if
necessary (see section 3.10.1).
5