wtw IQ SENSOR NET System 2020 XT Operating Manual Download Page 102

Page: 102 / 216

Operation

System 2020 XT C

ONNECT

4 - 28

ba75970e01

10/2012

4.7.2 Calibration history

The calibration history contains the detailed calibration data of the last

calibrations.

Call up the measured value display with <M>.

Using <



>, highlight a sensor and confirm with <OK>.

The

Display/Options

menu opens.

Using <



>, highlight the menu item,

Calibration history

of selected sensor

, and confirm with <OK>.

The calibration history with the results of the last calibration

procedures opens.

Exit the

Calibration history of selected sensor

overview with

<M>.

Summary of Contents for IQ SENSOR NET System 2020 XT
























































































































































































































Search results

Summary of Contents for IQ SENSOR NET System 2020 XT

Reviews:

Brands by name

Popular brands

wtw IQ SENSOR NET System 2020 XT, Operating Manual

Search results

Summary of Contents for IQ SENSOR NET System 2020 XT

Reviews:

Brands by name

Popular brands