wtw inoLab Multi 9310 IDS, Operating Manual, Page: 8 / 114

Overview inoLab
®
Multi 9310 IDS
8
ba75937e10 08/2021
1.2 Multi 9310P IDS meter with integrated printer
The integrated printer of the Multi 9310P IDS enables to document measure-
ments according to GLP requirements.
1.3 Sensors
A measuring system ready to measure consists of the Multi 9310 IDS meter
and a suitable sensor.
Suitable sensors are IDS pH sensors, IDS ORP sensors, IDS conductivity
sensors and IDS D.O. sensors.
The information concerning the printer of the Multi 9310P IDS is
given in a separate chapter (see section 13 P
RINTER
(
ONLY
M
ULTI
9310P IDS), page 93).
1 Keypad
2 Display
3 Connectors
4 Printer
5 Control panel of the printer
Information on available IDS sensors and IDS adapters is given on
the Internet.
You can also operate non-IDS sensors with the aid of an IDS
adapter on the Multi 9310 IDS. The advantages of the sensor
recognition, however, are not available in this case.
Prin
ter
modu
l
9310P
IDS
1
2
3
4
5