wtw inoLab 740, Operating Manual

Page: 55 / 274

System settings
55
5.4 Acoustic signals
You can select which events are to trigger an acoustic
signal:
l Warning messages ( Signal )
l
When measuring range limits are exceeded ( Limit )
l Each time a key with no function is pressed ( no func )
You can select several options at the same time.
Selecting acoustic
signals
1 Switch to the Menu mode.
2 Select the main Opt menu with
46
.
3 Select the Setup menu item with
82
.
4 Confirm the Setup menu item with
g
.
5 Select the Signal menu item with
82
.
6 Confirm the Signal menu item with
g
.
7 Select the Signal, Limit or no func menu item with
82
.
8 Confirm the selected menu item with
g
.
The selected acoustic signal is active (
✔
).
9 Option:
Activate further acoustic signals (
✔
).
10 Leave the Menu mode with [ESC] .