wtw inoLab 740, Operating Manual

Page: 210 / 274

Data storage
210
11.3 Storage of calibration records
The following calibration results are automatically stored in
a record during each calibration:
l Calibrating for pH/ISE and D. O. measurements
l
Determination of the cell constant of conductivity
measuring cells.
The text displayed on the calibration protocol shows the
calibration data for all measured variables as continuous
text. You can recall the data of the last calibration/
determination at any time:
1 Switch to the Menu mode with [Menu] .
2 Use
46
to select the main Cal menu.
3 Using
82
select the Cal. Prot... menu item.
4 Use
g
to confirm the Cal. Prot... menu item.
The Cal. records window opens.
The first page of the calibration records is displayed.
5 Scroll through the display text with
2
.
6 Scroll through the display text with
82
.
7 Terminate the Menu mode with [ESC] .