wtw inoLab 740, Operating Manual

Page: 147 / 274

Dissolved oxygen (D. O.)
147
Note
In order to accept the current measured value without
waiting for the end of the AutoRead function, simply press
g
on the terminal or measuring module or the key on the
StirrOx G probe.
Reproducibility
criteria
With identical measurement conditions, the following
applies:
Measured
parameter Reproducibility Response
time
D. O.
concentration better than 0.05 mg/l > 10 seconds
Oxygen
saturation index better than 0.6 % > 10 seconds
Oxygen partial
pressure better than 0.6 mbar > 10 seconds