wtw DIQ/S 282, Operating Manual, Page: 82 / 186

Settings/setup DIQ/S 28X
82
ba77168d02 03/2017
 Access control with instrument block (see section 5.3.2):
Default settings Access control is switched off in the delivery condition.
Any user can carry out all functions.
Saving the
password
If access control for the IQ S
ENSOR
N
ET
is active and the administrator pass-
word is lost, rapid administrator access to the IQ S
ENSOR
N
ET
is no longer
possible.
To avoid losing the administrator password, we recommend saving it. This also
applies to the use of the electronic key.
To save the administrator password, you can save it on an electronic key, for
example, and/or note it down on paper or on a PC. Keep the passwords in a safe
place.
5.3.1 Activating the access control
Access control provides three preconfigured user rights in the system. Each
user type can be protected with its own password.
User right The current user right is shown on the display with the following symbols.
Access to the system with active access control (see section 4.3).
If the IQ S
ENSOR
N
ET
is locked and the administrator password lost,
you can unlock the system with a master password. Please contact
the service department.
The master password is valid for 7 days.
If you have unlocked the IQ S
ENSOR
N
ET
with the master password,
we recommend to note down the normal administrator password
and keep it in a safe place.
Validity User right Symbol User rights
System-wide Settings are
unlocked
(access control
swiched off) A All functions in the system are accessible to
all users