wtw DIQ/S 282, Operating Manual, Page: 66 / 186

Operation DIQ/S 28X
66
ba77168d02 03/2017
Fig. 4-13 Monthly load of selected sensor (example)
4.4.5 Transmitting recorded measurement data to a PC
Recorded measured values can be transmitted to a PC via the Ethernet inter-
face. For details on data transmission, see section 6.
4.5 Messages and log book
The IQ S
ENSOR
N
ET
continuously monitors the status of the entire system. If the
IQ S
ENSOR
N
ET
identifies system changes, a message appears. New messages
can be recognized by the flashing information symbol or error symbol on the
display.
All messages are recorded in the log book.
4.5.1 Message types
The system differentiates two types of messages:
 Error
h
Indicates a critical status in the system or an individual system component
that requires immediate action.
5 Move the cursor (X) along the measured value curve with <  > .
The cursor (X) marks the selected measured value.
6 Switch to the next display option with a shorter display period with
<OK> .
or
Switch to the next display option with a longer display period with
<ESC> .