wtw DIQ/S 282, Operating Manual, Page: 59 / 186

DIQ/S 28X Operation
59
ba77168d02 03/2017
4.2.2 Entering texts or numerals
You can assign names to IQ sensors and MIQ output modules. Example: Enter-
ing a sensor name:
Fig. 4-5 Edit list of sensors
4 Return to a higher level with <ESC> .
or:
Switch to the measured value display with
<M> .
1 Open the Einstellungen/Settings menu with <S> .
2 Select the Edit list of sensors menu item with <

> .
3 Confirm the Edit list of sensors menu item with <OK> .
The Edit list of sensors display opens. A column is highlighted.
4 Select the Sensor name column with <  > .
5 Confirm the Sensor name column with <OK> .
A sensor name is highlighted.
6 Select a sensor name with <

> .
7 Confirm the selection with <OK> .
The name of the selected sensor is edited.