wtw DIQ/S 182-PR, System Operating Manual

Page: 66 / 146

Operation System 182
4 - 6 ba75503e07 04/2012
4.3.3 Entry mode
In the entry mode, you can change individual values or enter a
character string. Depending on the value type, change a value as
follows

Fixed values of a selection list (e.g. sensor measuring ranges):
This is the most frequent form of an entry. Select the required option
with the toggle switch
w
and confirm the selection with
g
. The
display switches back to the setting table.
Fig. 4-5 Example of a selection list

Character strings (text and numerals):
The following letters, numerals and special characters can be
entered:
AaBb..Zz0..9µ%&/()+-=><!?_ °
.
Entries are made character after character. Select the first character
with the toggle switch
w
and press
g
. The entry mark moves to
the next position and indicates
P
. Select the next character with the
toggle switch
w
. When you have selected the required sequence
of characters select
P
as the following character and press
g
. The
entry is completed with this and the display switches back to the
setting table.
Fig. 4-6 Example of text entry