wtw DIQ/S 182-MOD, System Operating Manual, Page: 38 / 150

Installation System 182
3 - 24 ba75504e07 04/2012
3.5.4 Top hat rail mounting
Materials required

THS/IQ kit for top hat rail mounting (see chapter 11 A
CCESSORIES
AND OPTIONS
).
Tools

Phillips screwdriver.
Mounting the Universal
Transmitter on a top hat
rail
Fig. 3-21 Mounting the Universal Transmitter on a top hat rail
1 Screw the clamping assembly (pos. 1 in Fig. 3-21) onto the
back of the Universal Transmitter with the two plastic tapping
screws (pos. 2).
2 Attach the Universal Transmitter onto the top hat rail from
above using the clamping assembly and press against the rail
until the clamping assembly clicks into place. The Universal
Transmitter can be moved sideways afterwards.
3 To unhook the Universal Transmitter, press it downward and
pull it forward at the bottom.
B
ei
St
apelm
ont
age
A
ufkleber
ent
fernen
und
K
ont
aktträger
m
ontieren
For
st
ack
m
ounting
rem
ove
label
and
inst
all
cont
act
carrier
1
2