wtw DIQ/S 182-MOD, System Operating Manual, Page: 33 / 150

System 182 Installation
3 - 19 ba75504e07 04/2012
3.5.2 Mounting on a mounting stand with the SSH/IQ sun shield
Materials required

SSH/IQ sun shield (see chapter 11 A
CCESSORIES AND OPTIONS
).
Tools

4 mm set screw wrench

Phillips screwdriver.
Mounting the sun shield
on a mounting stand
Fig. 3-15 Mounting the SSH/IQ sun shield on a mounting stand
1 Screw the sun shield (pos. 1 in Fig. 3-15) with the four
hexsocket head screws (pos. 2), the washers (pos. 3) and the
clamps (pos. 4) at the required height on the mounting stand
from the back.
2
3
4
1