wtw DIQ/S 182-MOD, System Operating Manual

Page: 18 / 150

Installation System 182
3 - 4 ba75504e07 04/2012
3.4 Connecting system components
3.4.1 Connecting MIQ modules: General information
You can connect the Universal Transmitter to MIQ modules without
connection cable (stack mounting).
Mounting direction
Variant 1 - stack expansion
forwards.
The back of the Universal
Transmitter or an MIQ module is
attached to the lid of an
MIQ module
(page 3-6).
Select this variant if an
MIQ module is already
permanently installed, e.g. to a
wall.
Variant 2 : - stack expansion
backwards.
The lid of an MIQ module is
attached to the back of the
Universal Transmitter or another
MIQ module (page 3-9).
Select this variant if the
Universal Transmitter or other
MIQ module is already
permanently installed, e.g. in a
panel.
MIQ Module
MIQ Module
DIQ/S 182-MOD
MIQ Module
MIQ Module
MIQ Module
DIQ/S 182-MOD
MIQ Module