wtw DIQ/S 182-MOD, System Operating Manual, Page: 114 / 150

Modbus connection System 182
7 - 4 ba75504e07 04/2012
Note
Please observe the operating manual of the connector.
7.3 Setting the Modbus interface parameters
The setting of the Modbus interface parameters (RS 485 interface) is
done in the menu,
MODBUS configuration .
Settings
Proceeding:
setting the interface
parameters
Setting Selection/Values Explanation
Device Address 1 ... 247 Device address of
the DIQ/S 182-MOD
Baud rate 1200
2400
4800
9600
19200
38400
57600 Baud rate
Parity None
Even
Odd Parity
None
(2 stop bits)
Even
(1 stop bit)
Odd
(1 stop bit)
1 Open the SETTINGS menu with
s
.
2 Select and confirm the MODBUS configuration menu item with
w
and
g
.
3 Edit the setting table as described in section 4.3.2.