Cond 7310
Settings
ba75933e04
06/2013
33
6.2.2
Data storage
This menu contains all functions to display, edit and erase stored measured
values and calibration records (see section 7 D
6.3
Reset
You can reset (initialize) all sensor settings and sensor-independent settings
separately from each other.
6.3.1 Resetting the measurement settings
The following settings for conductivity measurements are reset to the default
settings with the
Reset
function:
System
/
Clock
Time
Date
Date format
Settings of time and date.
For details, see section 4.4.5
E
System
/
Service infor-
mation
Hardware version and software
version of the meter are dis-
played.
System
/
Reset
-
Resets the system settings to
the default values.
For details, see section 6.3.2
R
The calibration data are reset to the default settings together with
the measuring parameters. Recalibrate after performing a reset.
Setting
Default settings
Cal. interval
150 d
Measured parameter
ϰ
Cell constant (C)
(calibrated)
0.475 cm
-1
or 0.840 cm
-1
(nominal cell constant of the conduc-
tivity measuring cell last calibrated)
Cell constant (C)
(set)
0.475 cm
-1
Temperature compensation
nLF
Menu item
Possible set-
ting
Description
Summary of Contents for Cond 7310
Page 58: ...Index Cond 7310 58 ba75933e04 06 2013...
Page 59: ......
